Guides & Reports

Datanorm, BMEcat and ETIM: product data formats in building materials explained

Anyone who prices building materials needs articles, prices and features in clean form. Three names come up constantly: Datanorm, BMEcat and ETIM. They do not solve the same problem. Datanorm and BMEcat are formats for data exchange, ETIM is a classification. Once you separate them, you know what a supplier can deliver and what to watch for at import.

Abstract illustration: three cards with a file, catalogue and label symbol are connected by lines to a table.
Introduction
Datanorm carries articles and prices, BMEcat is an XML catalogue format, ETIM is a vocabulary for features.

1986

is when Datanorm was first published, then as version 3, and it became a widespread way to exchange article and master data in the installation and building trade (datanorm.de)

9900

lines of 40 characters is the maximum length of a tender text according to the Datanorm version overview (datanorm.de, versions)

2005.2

is the current version of the XML catalogue format BMEcat according to BME; version 1.0 appeared in November 1999 (BME, BMEcat (German), BME, origins and goals (German))

4 types

of features exist in ETIM: alphanumeric, yes/no, number and range. Each feature has a description, type, unit or list of values (ETIM International, Model Information)

Short answer

  • Datanorm: file format for exchanging article and master data in the installation and building trade, with texts, prices, discount groups and product groups.
  • BMEcat: BME's XML format for B2B product catalogues, currently in version 2005.2.
  • ETIM: classification standard for technical products with classes, features, values and units, not a file format.
  • Before any import, check version, completeness, price unit and unit of measure.

As of: 16 November 2026 · Figures from the specification pages of datanorm.de, BME and ETIM International

What is Datanorm?

Datanorm is the standard procedure with which manufacturers, wholesalers and tradespeople in construction exchange article and master data. You can transmit article texts, prices, groups, surcharges and pictures with it (datanorm.de).

Important: Datanorm is a data format, not software. You need a program that can create and read the format (datanorm.de). According to Wikipedia, it is mainly used in the ancillary building trades, for example plumbing, heating, electrical and painting (Wikipedia, Datanorm (German)).

How did versions 3, 4 and 5 come about?

Version 3 appeared in 1986. Version 4 followed in 1994, switched the field separator to a semicolon and made the files much smaller. New were, among others, currency codes, packaging quantity, surcharges for tiered prices, raw material surcharges and working times (datanorm.de, version 4).

Version 5 came in May 1999. It aligned field lengths and data structures with EDIFACT subsets and the GAEB transfer records (datanorm.de, version 5). Because version 4 is often enough for simple article data, both versions are still transmitted today (datanorm.de, version 5).

What is inside a Datanorm file?

A Datanorm delivery consists of several text files with fixed names. Each line is one record that starts with a record identifier (Wikipedia, Datanorm (German)). The table shows the main files.

Typical files of a Datanorm delivery
FileContent
DATANORM.001Articles: create, change, delete
DATPREIS.001Price changes
DATANORM.RABDiscount groups
DATANORM.WRGProduct groups
DATASETS.001Service records and bills of materials

The files carry running numbers (001 to 999). Source: Wikipedia, Datanorm (German), retrieved 16 November 2026.

What version 5 adds is interesting for quotes. Besides list price and net price, a direct-delivery price, a recommended retail price and a guide price can be transmitted. A unit of measure can come with a calculation unit and a conversion factor, for example a pipe in 4-metre lengths that is billed in metres (datanorm.de, version 5).

If the supplier deletes an article, it can send a phase-out date and a replacement article. That lets replacement articles be assigned automatically to ongoing projects and bills of materials (datanorm.de, version 5).

What is BMEcat?

BMEcat is an XML-based exchange format for catalogue data in B2B. It is meant to map and support the procurement process from ordering to invoicing (BME, BMEcat (German)). The German Federal Association of Materials Management, Purchasing and Logistics (BME) initiated it, and version 1.0 was adopted in November 1999 (BME, origins and goals (German)).

The current version is 2005.2 (BME, BMEcat (German)). Compared with version 1.2, BMEcat 2005 brings, among other things, multilingual catalogues in a single file, products of several suppliers in one catalogue, dynamic price formulas and logistics data such as dimensions, delivery times or customs tariff data (BME, origins and goals (German)).

BMEcat does not prescribe a classification. From the start it was closely tied to ECLASS, though, and products classified under ECLASS can be transmitted with all features (BME, origins and goals (German)). How BMEcat handles units of measure and packaging units is explained in Converting units of measure.

Datanorm carries articles and prices, BMEcat packages catalogues, ETIM provides the vocabulary for features.

What is ETIM?

ETIM is an international classification standard for technical products. It sorts products into classes and describes each class with defined technical features (ETIM International, Classification). A class bundles similar products of different manufacturers (ETIM International, Model Information).

The model consists of groups, classes, synonyms, features, values and units. Classes, features, values and units have unique, language-independent identifiers; only the descriptions depend on language (ETIM International, Model Information).

A feature is alphanumeric (list of values), logical (yes or no), numeric (one value) or a range (two values). Numeric features and ranges need a unit (ETIM International, Model Information).

Is ETIM an exchange format?

No, ETIM provides the structure, not the file. For classified product data, ETIM International used to recommend BMEcat and has since released the JSON-based ETIM xChange format, currently in version 1.1. Each national ETIM organisation sets the preferred format itself, and in some countries separate sector formats still apply (ETIM International, Exchange Format).

Datanorm, BMEcat and ETIM compared

The three terms sit on different levels. A supplier can, for example, send you a BMEcat file whose features are classified under ETIM. Datanorm and BMEcat, on the other hand, are two ways to carry similar content.

The three terms at a glance
TermTypeCore
DatanormFile formatArticles, prices, discounts
BMEcatXML formatCatalogues, prices, features
ETIMClassificationClasses, features, values

Summarised from datanorm.de, BME, BMEcat (German) and ETIM International, Model Information, retrieved 16 November 2026.

Why does this matter for quotes and tenders?

A bill of quantities describes properties in words, a catalogue carries them as fields. The more structured a feature is in your article master, the easier you can compare it with a requirement. ETIM provides a uniform vocabulary for that. This is our assessment, not a statement by the standard owners.

  • Prices: Datanorm has its own direct-delivery price. Why direct delivery and warehouse supply need separate checks is covered in the glossary Direct delivery, warehouse and project business.
  • Units: the BoQ unit and the order unit often differ. Datanorm 5 and BMEcat have dedicated fields for this; the calculations are shown in Converting units of measure.
  • Replacement: a replacement article in the supplier data helps when an article is phased out. How to offer alternatives is shown in Winning with alternates.
  • System: which data belongs in the ERP and which interfaces exist is covered in the guide ERP integration for tenders.

How to prepare your article master for matching overall is described in the guide Product data for tenders.

Checkpoints before the import

This list helps before you load supplier data into your ERP or quoting software.

  1. Clarify format and version: Datanorm 4 or 5, BMEcat 1.2 or 2005.x? From Datanorm 5, the header record lets a machine detect the type of transmitted data (datanorm.de, version 5).
  2. Check completeness: Datanorm 5 has an end record with the number of records, so you can verify that everything arrived (datanorm.de, version 5).
  3. Check the price basis: in Datanorm 5 the price unit is written directly into the file; before, there were only flags for 1, 10, 100 and 1000. The currency EUR belongs in the header record (datanorm.de, version 5).
  4. Reconcile units: do the unit of measure and the calculation unit match your pricing? For bar or roll goods you need the conversion factor (datanorm.de, version 5).
  5. Think about discounts: discount groups sit in their own file in Datanorm. Check that they belong with the price file and whether tiered prices are included (Wikipedia, Datanorm (German), datanorm.de, versions).
  6. Check the schema: BMEcat files can be validated against BME's XSD files (BME, BMEcat downloads (German)). For BMEcat with ETIM data, ETIM International offers a certification tool (ETIM International, Exchange Format).

What does this mean for Scalera?

The Scalera website says you can upload product data manually, for example quarterly, or connect it via interface (Scalera FAQ). According to the FAQ, matching works best with standard articles with fixed numbers and with configurable products with up to 30 features (Scalera FAQ).

You export matched tenders as CSV, XML, GAEB or via API into ERP, CPQ or CRM systems (Product matching). Whether Datanorm, BMEcat or ETIM is read directly at import is not stated on the website. The best way to clarify it is a sample of your data in the demo call.

Frequently asked questions

What is the difference between Datanorm and BMEcat?

Datanorm is a format for exchanging article and master data in the installation and building trade, BMEcat is an XML-based exchange format for catalogue data in B2B (datanorm.de, BME, BMEcat (German)). Both carry articles and prices, but with different technology and a different scope.

Is ETIM a file format?

No. ETIM is a classification standard for technical products with classes, features, values and units. For exchanging classified data, ETIM International has released the JSON-based ETIM xChange format; it used to recommend BMEcat (ETIM International, Exchange Format).

Which Datanorm version is current?

Version 5 appeared in May 1999. According to datanorm.de, version 4 is still used often for simply structured article data, so both versions are transmitted today (datanorm.de, version 5).

Where do I find the specifications?

BMEcat descriptions and schema files are available for download from BME (BME, BMEcat downloads (German)). According to datanorm.de, the Datanorm documentation is published as books by Krammer Verlag, plus an English developer guide as a PDF (datanorm.de). ETIM offers the xChange documentation as a download (ETIM International, Exchange Format).

Does Scalera read Datanorm or BMEcat files?

For product data, the website mentions manual upload, for example quarterly, or a connection via interface (Scalera FAQ). It does not state which file formats are possible at import. Clarify that in the demo call with your real data.

Do I need ETIM to automate quotes?

The Scalera website names no ETIM requirement. It names standard articles with fixed numbers and configurable products with up to 30 features (Scalera FAQ). Structured features help when matching against the bill of quantities, whichever vocabulary you maintain them in. That is our assessment.

Key takeaways

  • Datanorm and BMEcat are formats for data exchange, ETIM is a classification and not a file format.
  • Datanorm has existed since 1986 and comes in versions 3, 4 and 5. Versions 4 and 5 are both in circulation today.
  • BMEcat 2005.2 is current; for classified data, ETIM International now offers ETIM xChange.
  • Before importing, check version, record count, price unit, unit of measure and discount files.

Next steps

  • Ask your three most important suppliers for the format, version and update rhythm of their article data.
  • Read how to prepare your article master for matching: Product data for tenders.
  • Test with a sample of your product data and one of your own bills of quantities how Scalera matches items: Book a demo.

Disclosure: Scalera publishes this glossary. Statements on Datanorm, BMEcat and ETIM come from the pages of the respective publishers, statements on Scalera from our website.

Sources

  1. DATANORM.de: What is DATANORM?, retrieved 16 November 2026
  2. DATANORM.de: DATANORM versions, DATANORM 4 and DATANORM 5 (German), retrieved 16 November 2026
  3. Wikipedia: Datanorm (German; file names, record identifiers, fields of use; secondary source), retrieved 16 November 2026
  4. BME (German): BMEcat, origins and goals and downloads, retrieved 16 November 2026
  5. ETIM International: Classification, Model Information and Exchange Format, retrieved 16 November 2026
  6. Scalera, Product matching and FAQ, retrieved 16 November 2026