Impact

What JMS Group shows about quote capacity

This Impact article takes the published JMS Group case study and the customer video with Corvin Hagen as its starting point. The focus is not the company history, but four learnings that other manufacturers and distributors can apply to their own quoting process.

Abstract illustration: a stack of tender sheets on the left, rising capacity bars in the middle, several sent quote envelopes on the right.
Introduction
JMS Group sends 10x more quotes at a 99 % hit rate (top 1). The time gained goes into customer contact; the collaboration runs into the 2030s.

10x

more quotes sent (source: JMS Group case study)

99 %

hit rate on the first suggestion, top 1 (source: JMS Group case study)

10x

more efficient quote preparation (source: JMS Group case study)

2030s

collaboration extended (source: JMS Group case study)

In short

  • JMS Group in Schmerikon sends 10x more quotes with Scalera, at a 99 % hit rate (top 1).
  • The time gained is meant to go into customer contact, not just a larger stack of quotes.
  • For other manufacturers and distributors, four points matter: capacity limits the work you can take on, the first product suggestion has to be right, long bills of quantities contain a lot that is not needed, and results carry the collaboration.
  • In the video (2:50 min), Corvin Hagen and Jonathan Artiles speak. The full JMS Group case study remains the source for figures and quotes.

Figures as published in the case study and customer video, checked on 16 November 2026 (Europe/Zurich).

Why quote capacity decides which orders you win

If your team can only finish a fixed number of incoming tenders, every further enquiry waits or is not answered at all. The JMS Group case study puts the commercial point in one line: answering more tenders means more chances to win the work. Before you talk about software, it is worth asking how many quotes your sales team can actually send.

For a provider that covers several service areas – building materials, civil engineering, transport and waste management – a single tender often spans many trades. Each item has to be matched to the company’s own offering. Capacity is therefore more than minutes per file: it decides how many incoming enquiries the sales team can close.

“We use AI in quote preparation to increase the impact of our sales department.” – Corvin Hagen, CFO / Head of Finance & Services, JMS Group (translated from German)

The starting point at JMS Group

Based in Schmerikon, almost 400 people, active in gravel and concrete, transport and waste management, and civil and special foundation engineering: these facts are in the published JMS Group case study. The family business is now almost 100 years old; the full story – including the sources jms.ch and the customer video – is there.

Because the group offers several services from a single source, tenders arrive that span more than one area at once. Before Scalera was in use, the team matched every item to its own range by hand. The effort was high. Two observations from the case study may sound familiar:

  • Bills of quantities running to several hundred pages are not unusual.
  • Not every detail in a tender is needed for the quote; it still has to be read first.

This mix of volume and limited relevance is what uses up capacity before the first price is set. The case study does not publish a processing time per quote before and after the introduction; the figures below refer to output, hit rate and efficiency, not to minutes per file.

“We gain time by handing routine work over to AI, to Scalera. Scalera analyses customer enquiries for us, and we can reinvest the time we gain in getting in touch with our customers more and understanding their needs even better.” – Corvin Hagen, CFO / Head of Finance & Services, JMS Group (translated from German)

How the process works with Scalera

When a bill of quantities comes in, the sales team puts the file into Scalera. What comes back is an evaluation: AI proposes matching items from JMS Group’s range. According to the JMS Group case study, the first suggestion (top 1) is right in 99 % of cases. The result is quotes that can go out the door.

This step is product matching: AI proposes matches from your own catalogue for the bill-of-quantities items, and the team reviews and completes the quote. The case study does not list which file formats JMS Group uses day to day. In general, Scalera processes PDF, GAEB, Excel and CSV among other formats – that is stated on the product page, not in the JMS story.

“With Scalera, processing customer enquiries has become easier and much faster.” – Jonathan Artiles, Building Materials Sales, JMS Group (translated from German)

What has measurably changed

The case study reports four results and a decision about the collaboration. No figure has been published for the additional tenders won, so we do not invent one.

JMS Group results, each with its source
MetricResultSource
Quotes sent10x moreJMS Group case study
Hit rate99 % (top 1)JMS Group case study
Efficiency10xJMS Group case study
Tenders wonMore, no figureJMS Group case study
Partnershipinto the 2030sJMS Group case study

All figures are taken from the published JMS Group case study (live page checked on 16 November 2026, Europe/Zurich). No further metrics added.

After an initial one-year term, both sides extended the collaboration into the 2030s. Corvin Hagen links that decision to a simple idea: results create trust.

“In the end, results create trust. We started with a one-year collaboration and then decided to extend it into the 2030s.” – Corvin Hagen, CFO / Head of Finance & Services, JMS Group (translated from German)

On video: Corvin Hagen and Jonathan Artiles

In the customer video Scalera x JMS-Gruppe, Corvin Hagen, CFO and Head of Finance & Services at JMS Group, and Jonathan Artiles, Building Materials Sales, speak first-hand. The video runs for 2:50 minutes and was published on 3 November 2026 at 16:39 (Europe/Zurich) on the SCALERA YouTube channel.

Customer video with Corvin Hagen and Jonathan Artiles (2:50 min). Source: YouTube, channel SCALERA, Scalera x JMS-Gruppe. The approved figures and quotes are in the JMS Group case study.

We do not take any extra figures or sentences from the video that are not already in the case study. Watch the conversation for tone and context; use the case study when you need a citable figure.

Four learnings for manufacturers and distributors

The JMS story is not a promise that your team will reach the same ratios. It does show four decisions that other manufacturers and distributors can apply – whether your catalogue is gravel, technical products or merchanted goods.

1

Make capacity visible first

If you only measure minutes per quote, you will not see how many incoming tenders are never answered. At JMS Group, the lever is the number of quotes that actually go out.

Ask your team: how many enquiries do we get to the point of sending today?

2

Time gained belongs with the customer

Corvin Hagen describes the benefit not as a larger pile of documents, but as more contact and a better understanding of customer needs.

Before you introduce a tool, decide what the freed-up hours in sales will be used for.

3

The first suggestion has to be right

A 99 % hit rate on the first suggestion (top 1) means the team confirms instead of searching. The quality of the first match sets the pace.

Go deeper: product matching and analysing a bill of quantities with AI.

4

Results carry the collaboration

JMS Group started with one year and extended into the 2030s because results created trust. That is not an automatic path for every company.

Start with something measurable and extend only when the agreed metrics hold.

A fifth, often underestimated point sits in the starting situation: long bills of quantities include pages you do not need for the quote, but still have to review. Once you know that share, you can see why automatic matching frees so much capacity.

Frequently asked questions

What has measurably changed at JMS Group?

According to the published JMS Group case study, JMS Group sends 10x more quotes, reaches a 99 % hit rate on the first suggestion (top 1) and prepares quotes 10x more efficiently. It also wins more tenders; no exact figure for that has been published.

Where does the time gained go?

In the case study, CFO Corvin Hagen says JMS Group hands routine work over to AI and uses the time gained to get in touch with customers more and understand their needs better. The lever is not just more documents, but more sales time with the customer.

How does quote preparation work at JMS Group with Scalera?

The sales team puts incoming bills of quantities into Scalera and gets an evaluation back. AI proposes matches from JMS Group’s range; the first suggestion (top 1) is right in 99 % of cases. That produces quotes that can be sent. The full walkthrough is in the JMS Group case study.

Who are these learnings for?

For building-material manufacturers and distributors that answer incoming tenders and whose quote capacity is limited by manual effort. JMS Group works across several service areas (building materials, civil engineering, transport, waste management). The four learnings – capacity, customer contact, quality of the first suggestion, measurable results – do not depend on a particular company size.

Is there a video of the collaboration?

Yes. In the customer video Scalera x JMS-Gruppe (2:50 min, published on 3 November 2026, channel SCALERA), Corvin Hagen, CFO of JMS Group, and Jonathan Artiles, Building Materials Sales, speak first-hand. The approved figures and quotes are in the JMS Group case study.

Key takeaways

  • Quote capacity limits how many tenders your team can answer and how many chances to win you can actually take.
  • JMS Group sends 10x more quotes, at a 99 % hit rate (top 1) and with 10x more efficient quote preparation (source: JMS Group case study).
  • The time gained should go into customer contact and understanding needs, not just into more quotes.
  • The first product suggestion sets the pace; long bills of quantities often contain a lot that is not needed for the quote itself.
  • The collaboration started with one year and runs into the 2030s. No figure has been published for additional tenders won.

Next steps

  1. Read the full JMS Group case study – it holds the company story, the process and every approved metric.
  2. Watch the customer video Scalera x JMS-Gruppe with Corvin Hagen and Jonathan Artiles (2:50 min).
  3. On the product matching page, see how bill-of-quantities items are matched to your catalogue.
  4. The guide to automating proposals places this step in the wider quoting process; product matching at scale goes deeper on match quality.
  5. In the Impact column you will find further practice examples, including an anonymised Impact story with different, anonymised figures – do not mix them with the JMS numbers.
  6. If you want to test the process against your own catalogue: book a demo.

Sources

  1. JMS Group case study, https://www.scalera.ai/en/case-study/jms (live page and CMS item, checked on 16 November 2026, HTTP 200).
  2. Customer video Scalera x JMS-Gruppe, https://www.youtube.com/watch?v=Q0nwrrCYCyU (2:50 min, published 3 November 2026, 16:39 Europe/Zurich, channel SCALERA).
  3. Product-matching product page – only for general product statements, not for JMS metrics.
  4. Quotes by Corvin Hagen and Jonathan Artiles: wording of the published case study (CMS Case Studies, JMS Group item). They are not also held in the Testimonials collection.