Articles

Answering electrical tenders with AI: luminaires, cables, automation

An electrical bill of quantities mixes luminaires, cables, switch ranges, security and automation technology. Each group has its own technical values, and two articles from the same range sometimes differ in only one of them. This industry page shows what to check before you quote and where AI shortens the work.

Abstract illustration: luminaire, cable drum and switch as symbols, connected by lines to an ordered quote sheet
Introduction
In electrical tenders, protection rating, protection class, lighting values, cable type and protocol decide which article fits. The AI detects these values in the item and suggests articles; your team checks the flagged special cases.

50–70%

less effort for tender analysis in the dealer network of dormakaba (access and building security, dormakaba case study)

2–3×

as many tenders processed by dormakaba partners with the same resources (dormakaba case study)

≈45%

time savings when analysing technical tenders at Sauter (Scalera, Product Matching)

64

control gear at most in a standalone DALI lighting control system (Wikipedia (German), DALI)

Industry page electrical and lighting, as of 18 November 2026. Note: Scalera is the publisher of this page. Technical values are referenced to Wikipedia articles, customer results and features to pages on scalera.ai. The standard and the data sheet remain binding.

Short answer

  • Three worlds in one BoQ: electrical tenders combine electrical installations, security and communication systems, and building automation.
  • A luminaire becomes unambiguous only with protection rating, protection class, light colour, colour rendering and control interface.
  • Cables and automation: cable type, number of cores and cross-section, or the protocol (KNX, BACnet, DALI), decide.
  • Measurably faster: dormakaba cuts tender analysis effort in its dealer network by about 50–70% (dormakaba case study).
  • People decide: your team checks equivalence, lighting design and special cases.

For manufacturers and wholesalers of luminaires, electrical installation material, security and building automation technology.

Why are electrical tenders so demanding for manufacturers and wholesalers?

Because a single BoQ covers several disciplines. DIN 276 separates them into cost groups 440 electrical installations, 450 communication, security and information systems, and 480 building and plant automation (Wikipedia (German), DIN 276). Luminaires, cables, switches, access technology and controllers therefore sit side by side, each with its own terminology.

Then there is volume. At dormakaba, each dealer processed thousands of tenders per year manually, and quote quality varied between partners (dormakaba case study).

The third hurdle is variants. A luminaire range comes in several light colours, protection ratings and control options, a switch range in several colours and frame sizes. Searching by range name finds the family, but not the article.

Which details make a luminaire item unambiguous?

Six technical values. The table shows what each one states and how to check it against the BoQ.

Technical values of a luminaire item
ValueWhat it statesCheck
Protection rating (IP)First digit: protection against solid objects and contact, second: protection against water (Schutzart)Both digits at least as required
Protection classI: protective earth, II: double or reinforced insulation, III: extra-low voltage (IEC 61140)Same class as in the BoQ
Colour temperatureLight colour in kelvin: warm white below 3300 K, neutral white 3300–5300 K, daylight white above (Farbtemperatur)Same value or same light colour
Colour rendering (Ra)How natural colours look, maximum value 100 (Farbwiedergabeindex)At least the required value
Luminous efficacyLuminous flux per power in lm/W (Lichtausbeute)Check both flux and power
Glare (UGR)Glare rating, reference values are set in EN 12464-1 (UGR)At most the required value

Sources: linked Wikipedia articles (German), accessed 18 November 2026. The standard and the manufacturer's data sheet are binding.

Then there is the control interface. If the BoQ specifies DALI, the luminaire's control gear must support the interface under IEC 62386; a standalone DALI system controls up to 64 control gear units (Wikipedia (German), DALI). A luminaire with the same light output but without this interface is a different article.

Which details make cable and installation items unambiguous?

For cables and wires, the answer is in the type designation. NYM-J 3x1.5 means: standard sheathed cable with a green-yellow protective conductor (-J), three cores of 1.5 mm² each (Wikipedia (German), cable and wire designations). Type, number of cores, cross-section and protective conductor must all match.

For switch and socket ranges, range, colour, frame size and mounting type (flush or surface) decide. If one of these details is missing in the item, it may be in the preliminary notes of the section; if it is not there either, it is a case for a clarification question.

What is different for building automation and security technology?

Here the protocol also decides. KNX is standardised as EN 50090 and ISO/IEC 14543-3 (Wikipedia (German), KNX standard), BACnet as ISO 16484-5 (Wikipedia (German), BACnet). Gateways can couple BACnet with DALI, KNX or LON (Wikipedia (German), BACnet).

For the quote, this means: a room controller or sensor must speak the specified protocol, or you include the gateway in the offer. So read the system description of the section as well as the item.

In access and security technology, quotes consist of hardware, software and services. dormakaba uses Scalera to standardise such system quotes and to map items to its own products (dormakaba case study).

Where do typical errors occur in electrical quotes?

1

Second IP digit missed

The luminaire is dust-tight but not protected against water jets.

Check: both digits

2

Wrong light colour

Same range, but 3000 K offered instead of 4000 K.

Check: kelvin value and Ra

3

Control interface missing

Luminaire without DALI control gear although the BoQ requires DALI.

Check: interface

4

Accessories forgotten

Frame, cover, mounting bracket or gateway missing from the quote.

Check: system description

Missing accessories are a topic of their own; how AI suggests add-ons is shown in Accessories and add-ons in quotes.

A luminaire only fits when protection rating, protection class, light colour and control interface match the BoQ, not just shape and wattage.

How does AI map electrical items to your own catalogue?

Scalera ingests tenders, extracts positions and matches products using a construction AI agent (Scalera, Product Matching). Input can be PDF, GAEB, Excel/CSV, XML or an email (Scalera, FAQ).

  • Product groups: positions are categorised by product groups so that lighting, cable and automation specialists can work in parallel (Scalera, FAQ).
  • Confidence scores: low-confidence matches are flagged for review (Scalera, FAQ).
  • Alternatives: click a suggested product to select another AI alternative directly (Scalera, FAQ).
  • Combinations: Scalera remembers product combinations and can suggest accessories and complementary products (Scalera, FAQ).
  • Variants: according to the FAQ, articles with a fixed number fit best, configurable products up to 30 attributes (Scalera, FAQ).

What do published results from electrical and building technology show?

  • dormakaba (access and building security): about 50–70% less effort in tender analysis, partners process 2–3× as many tenders with the same resources, typically +10–25% deal value through cross-selling (dormakaba case study).
  • Sauter (building automation): fast analysis of technical tenders, around 45% time savings with higher quote quality (Scalera, Product Matching).
  • Belimo: automated matching of valves, sensors and actuators, up to 60% less manual quoting effort in the DACH region (Scalera, Product Matching).

Other trades have their own values, such as HVAC and plumbing with nominal size and pressure, the building envelope with U-value and fire protection, or civil engineering with load classes.

How do you prepare master data and your team?

Maintain the values from the table as separate fields: protection rating, protection class, kelvin, Ra, luminous flux, power, interface, number of cores and cross-section. What matters here is described in Preparing product data for AI matching; catalogue formats are explained in the glossary Datanorm, BMEcat and ETIM.

Start with one product group, for example luminaires or installation material, and measure hit rate and processing time on completed tenders. A test plan for this is in Piloting AI tender software.

Key takeaways

  • Electrical BoQs combine DIN 276 cost groups 440, 450 and 480, each with its own terminology.
  • Luminaires become unambiguous through protection rating, protection class, light colour, colour rendering, glare and control interface.
  • For cables the type designation decides, for automation the protocol.
  • AI categorises positions by product groups and flags uncertain matches (Scalera, FAQ).
  • dormakaba, Sauter and Belimo show measurable effects on effort and throughput (dormakaba, Scalera, Product Matching).

Frequently asked questions

Which trades are part of an electrical tender?

In Germany, DIN 276 assigns electrical engineering to three cost groups: 440 electrical installations, 450 communication, security and information systems, and 480 building and plant automation (Wikipedia (German), DIN 276). An electrical BoQ can contain items from all three groups.

What does IP65 mean for a luminaire?

The first digit 6 means dust-tight, the second digit 5 means protection against water jets from any direction (Wikipedia (German), Schutzart (DIN EN 60529)). A luminaire offered must meet at least the required protection in both digits.

What does NYM-J 3x1.5 mean in a cable item?

NYM stands for a standard sheathed cable, -J for a green-yellow protective conductor and 3x1.5 for three cores of 1.5 mm² each (Wikipedia (German), cable and wire designations). If any one of these details differs, it is a different article.

Can AI read electrical BoQs in GAEB format?

Yes. According to the FAQ, the inputs include scanned or digital PDFs, GAEB, Excel/CSV, XML, emails and ÖNORM/ONLV (Scalera, FAQ). Questions about ERP export and data protection are answered in the Scalera FAQ.

Does the AI recognise a competitor's luminaire named in the tender?

Yes, according to the FAQ Scalera also recognises third-party products in the BoQ and names matching articles from your catalogue (Scalera, FAQ). Your team checks equivalence against the technical values; how to offer the alternative is covered in Winning with alternates.

How does the AI handle uncertain matches?

Scalera uses confidence scores, and low-confidence matches are flagged for employee review (Scalera, FAQ). This shows which items need a clarification question or a look at the data sheet.

Next steps

Take your next electrical tender and check every luminaire item against the six values and the control interface. In a demo you can see how Scalera maps the items to your catalogue; more on the Product Matching page.