Articles

Declaration of performance in tenders: what CPR 2024 changes

A bill of quantities asks for classes, values and standards. The evidence comes from the manufacturer's declaration of performance. With Regulation (EU) 2024/3110 it gets a new name, new content and a timeline that runs to 2040.

Abstract illustration: a document with a check mark and value lines, connected to three construction product shapes and a data carrier symbol.
Introduction
Whatever your quote says about an essential characteristic must be in the declaration. For most products the old declaration of performance still applies in 2026, the new declaration arrives product family by product family.

2026

since 8 January, the main part of the new Construction Products Regulation applies (Art. 96 Regulation (EU) 2024/3110)

19

environmental characteristics listed in Annex II, phased into new declarations up to 2032 (Art. 15(3))

18 months

after the delegated act on the passport, manufacturers must make it available (Art. 22(7))

10 years

economic operators keep the documents for the authorities (Art. 20(4))

In short

  • The main part of Regulation (EU) 2024/3110 has applied since 8 January 2026 (Art. 96).
  • For products covered by a standard under the old regulation, the existing declaration of performance remains in use until their product family migrates (Art. 95).
  • Performance claims on essential characteristics may appear elsewhere only if they are already in the declaration (Art. 19(4)).
  • Distributors check CE marking and declaration before making a product available (Art. 25(2)).

As of 20 Nov 2026. Legal texts on EUR-Lex and pages of the European Commission and the Swiss BBL checked in the original. Not legal advice.

What is a declaration of performance and why does it matter in a quote?

In the declaration of performance, the manufacturer states the performance of a construction product in relation to its essential characteristics, such as reaction to fire. By drawing it up, the manufacturer assumes responsibility for the product achieving that performance (Art. 4(3) Regulation (EU) No 305/2011, Art. 13(2) Regulation (EU) 2024/3110).

For your quote, it is the evidence. The regulation draws a clear line: claims about performance on essential characteristics laid down in a harmonised specification may be made elsewhere only if they are already in the declaration (Art. 19(4); previously Art. 4(2) Regulation 305/2011).

A data sheet, a product text or a quote line therefore cannot promise more than the declaration. A performance value for such a characteristic that is not in the declaration does not belong in the quote.

“Whatever your quote says about an essential characteristic must also be in the declaration of performance.”

What changed on 8 January 2026?

Regulation (EU) 2024/3110 entered into force on 7 January 2025, and its main part has applied since 8 January 2026 (Art. 96; European Commission, CPR 2024 revision). It gradually replaces Regulation (EU) No 305/2011.

The declaration of performance becomes the declaration of performance and conformity. It still states performance on essential characteristics and also confirms that applicable product requirements are met (Art. 15(1)). New is the environmental performance over the whole life cycle (Art. 15(2)).

The environmental characteristics are phased in: the four climate change characteristics in Annex II points (a) to (d) from 8 January 2026, points (e) to (m) from 9 January 2030 and points (n) to (s) from 9 January 2032 (Art. 15(3) and Annex II).

What is new in the declaration template?

  • the unique identification code of the product type and, where available, a batch or serial number (point 1(a))
  • the estimated average and minimum service life for the intended use (point 1(f))
  • the applied harmonised specification with reference number and date of issue (point 8)
  • the declared performance as values, levels or classes, which must be repeated in the declaration itself (point 9(b))
  • environmental sustainability and the version of the Commission software used (points 9(c) and (d))

The basis is the template in Annex V Regulation (EU) 2024/3110. Because the values must sit in the declaration itself rather than in a reference, they are directly usable when you check them against a bill of quantities.

Is the old declaration of performance still valid?

Yes, for most products for now. Harmonised standards cited under the old regulation and in force on 8 January 2026 remain valid until the Commission withdraws them (Art. 95(3)). For these products, the old rules on the declaration of performance continue to apply (Art. 95(8)).

The new obligations apply per product family one year after the act that makes a new harmonised standard mandatory (Art. 95(9)). According to the European Commission, the first standards to become mandatory are probably those for cement in 2027 (European Commission, Harmonised standards).

In tenders in 2026 you will therefore meet both terms. Check which regulation each declaration was issued under. If a declaration under the old regulation has no environmental data, that is not a formal defect, because the obligation belongs to the new declaration.

Migration timeline
DateWhat applies
7 Jan 2025Regulation (EU) 2024/3110 in force
8 Jan 2026Main part applies; climate change (Annex II a–d) in new declarations
2027probably first mandatory standards (cement)
9 Jan 2030Environmental characteristics e–m
9 Jan 2032Environmental characteristics n–s
8 Jan 2040Last articles of Regulation 305/2011 repealed

Sources: Arts. 15, 94 and 96 Regulation (EU) 2024/3110; European Commission, Harmonised standards (cement: Commission forecast).

Which parts of the declaration does your quote need?

Read a bill of quantities line like a checklist. Every required property should map to a place in the declaration. If you cannot find one, you lack the evidence.

Tender requirement and where it sits in the declaration of performance and conformity
Required in the tenderWhere in the declaration
Product, type, variantPoint 1: product-type code, variants
Standard, test basisPoint 8: specification with number and issue
Class or valuePoint 9: declared performance
Environmental dataPoint 9: environmental sustainability
Third-party controlPoints 5 and 7: notified body, certificates
Service lifePoint 1: estimated service life

Structure as in Annex V Regulation (EU) 2024/3110. Declarations under the old regulation follow the template in Annex III Regulation (EU) No 305/2011.

Fictional example: reaction to fire of an insulation board

A bill of quantities asks for reaction to fire A2-s1,d0 for an insulation board. The classes range from A1 to F, with additional classes for smoke production (s1 to s3) and flaming droplets (d0 to d2) (Delegated Regulation (EU) 2016/364, Annex).

If your product declares A2-s1,d0, the requirement is backed. If it declares A2-s2,d0, the main class matches but the additional class s1 is not declared. State this deviation openly in the quote or raise a clarification question. Whether another product counts as equivalent is covered in the article on spec-compliant alternatives.

What must distributors check before quoting?

The new regulation names distributors explicitly. Before making a product available, they verify that it bears the CE marking and that a declaration of performance and conformity is attached or available on a website (Art. 25(2)).

Customers must see the required information visibly before they are bound by a sales contract, including in distance sales (Art. 25(3)). In project business, this means linking the declaration for each product type in the quote itself.

Be careful with your own product texts. A distributor who claims characteristics that deviate from those declared by the manufacturer is considered the manufacturer and takes on its obligations (Art. 26(1)(d)). So copy performance data word for word from the declaration.

If you supply another country, the declaration needs the language required there, and whoever makes the product available there adds the translation (Art. 16(4)). How to answer tenders from other countries is covered in the article on foreign-language bills of quantities.

May a contracting authority demand additional evidence?

For products covered by harmonised technical specifications, the regulation creates a “harmonised zone”. Member States set no other essential characteristics and require no other assessments or markings for these characteristics (Art. 11(2) and (3)).

They also ensure that compliant products are not hindered by conditions set by public bodies. National requirements for the use of products remain possible but must rely on the assessment methods of the harmonised specifications (Art. 11(2)).

Whether a specific evidence requirement in a tender fits is a case-by-case question. Clarify it early with a clarification question instead of ignoring it in the quote.

Environmental requirements are being added. The Commission will set mandatory minimum environmental sustainability requirements by delegated act, which contracting authorities apply in EU-wide procurement when a contract requires such minimum performance (Art. 83(1) and (2)).

What does the digital product passport change?

The regulation provides for a digital product passport system for construction products (Art. 75). No later than 18 months after the related delegated act enters into force, manufacturers must make the passport available (Art. 22(7)). The Commission gives Q2 2027 as the indicative date for that act (European Commission, Digital Product Passport).

The passport contains the declaration of performance and conformity as well as product and safety information (Art. 76(2)). Already today, manufacturers may publish the declaration on a website, in human- and machine-readable form and linked via the product-type code (Art. 16(2)).

How to structure product data for this is covered in the articles on product data for tenders and on Datanorm, BMEcat and ETIM.

What applies in Austria and Switzerland?

In Germany and Austria the regulation applies directly as an EU regulation (closing formula Regulation (EU) 2024/3110).

In Switzerland, the Construction Products Act (SR 933.0) and the Construction Products Ordinance (SR 933.01) govern the matter. A construction product from the harmonised area must come with a declaration of performance in at least one official language (BBL, requirements for placing on the market, in German).

Swiss legislation is considered equivalent to Regulation (EU) No 305/2011. According to the BBL, the Federal Council intends to establish equivalence with the revised Regulation (EU) 2024/3110 so the mutual recognition agreement (MRA) can continue (BBL, Bauprodukte). Check the current status with the BBL before quoting in Switzerland.

How do you prepare declarations of performance for quotes?

Five fields in your item master are enough to answer the evidence question for every line quickly:

  1. Product-type identification code per item, because it links product and declaration (Art. 16(2)(f), Art. 22(5)).
  2. Link or file of the current declaration with version number and date (Annex V, header lines).
  3. Legal basis: declaration of performance under Regulation 305/2011 or declaration of performance and conformity under Regulation 2024/3110.
  4. Declared performance as attributes with value, class and unit, exactly as in the declaration, so you can compare them with tender requirements.
  5. Language versions per target market (Art. 16(4)).

How does Scalera help?

Product Matching recognises technical, functional and normative requirements from tenders and bills of quantities and matches lines to your products based on specification, application context and standard. Every suggestion shows its rationale and AI confidence (Scalera, Product Matching).

This shows you early which class or standard a line requires, so you can attach the right declaration. Risk Analysis checks clauses and requirements against standards, laws and occupational safety rules in the DACH region (Scalera, Risk Analysis).

The declared performance is still backed by the manufacturer's declaration, and your team makes the decision. According to its website, 150+ companies trust Scalera.

Frequently asked questions

Is the declaration of performance the same as CE marking?

No. CE marking is affixed after the declaration is issued and the technical documentation is prepared. It shows the product complies with the harmonised rules, while the values themselves are in the declaration (European Commission, CE marking and DoPC).

Does every construction product need a declaration of performance?

No. The obligation applies when the product is covered by a harmonised technical specification (Art. 13(1)). There is an exemption for individually manufactured or custom-made products under certain conditions (Art. 14).

How long do declarations under the old regulation remain valid?

As long as the product family stays under a harmonised standard cited under Regulation (EU) No 305/2011. The new obligations apply one year after a new standard is made mandatory (Art. 95(3), (8) and (9)).

Where do I find a manufacturer's declaration?

The manufacturer provides an electronic copy for each product or publishes the declaration on a website, linked via the product-type identification code. For a batch of identical products supplied to one user, one copy is enough (Art. 16(1) and (2)).

Does an own brand turn a distributor into a manufacturer?

Yes. Anyone placing a product on the market under their own name or trademark is considered the manufacturer and takes on its obligations. The same applies to a declared use different from the manufacturer's (Art. 26(1)(a) and (c)).

What is the environmental performance in the new declaration?

The declaration covers life-cycle environmental performance for the characteristics in Annex II. It is calculated with the latest software version the Commission provides free of charge (Art. 15(2)).

Can contracting authorities set their own environmental requirements?

Yes. Where EU-wide procurement requires a minimum environmental sustainability performance, mandatory minimum requirements from delegated acts will apply, and authorities may set more ambitious or additional requirements (Art. 83(2)).

Does the new regulation apply in Switzerland?

Not directly. Switzerland has its own Construction Products Act and Ordinance. According to the Swiss Federal Office for Buildings and Logistics (BBL), the Federal Council intends to establish equivalence with Regulation (EU) 2024/3110 so the mutual recognition agreement can continue (BBL, Bauprodukte, in German).

Key takeaways

  • The main part of Regulation (EU) 2024/3110 has applied since 8 January 2026, and the old declaration of performance remains valid for most product families for now.
  • Performance claims in a quote must be in the declaration, otherwise the evidence is missing.
  • The new declaration contains the product-type code, service life, specification with issue date and environmental performance.
  • Distributors check CE marking and declaration and take on manufacturer obligations if they claim deviating characteristics.
  • The digital product passport becomes mandatory 18 months after its delegated act.
  • In Switzerland the Construction Products Act applies, and alignment with the new EU regulation is intended.

Next steps

  • Add the product-type code, a link to the declaration and the legal basis to your item master for your main product groups.
  • Check your quote templates and data sheets: do all performance claims match the declaration word for word?
  • See how Scalera matches tender requirements to your products: Product Matching or book a demo.

Transparency note: This article is published by Scalera and is not legal advice. What counts is the wording of the regulations, the harmonised specification that applies to your product and the tender documents in each case.

Sources

  1. Regulation (EU) 2024/3110 of 27 Nov 2024 (Construction Products Regulation), Arts. 11, 13–16, 19, 20, 22, 25, 26, 75, 76, 83, 94–96, Annexes II and V, EUR-Lex, accessed 20 Nov 2026
  2. Regulation (EU) No 305/2011, Art. 4 and Annex III, EUR-Lex, accessed 20 Nov 2026
  3. Delegated Regulation (EU) 2016/364 (reaction to fire of construction products), Annex, EUR-Lex, accessed 20 Nov 2026
  4. European Commission, CPR 2024 revision, CE marking and DoPC and Harmonised standards, accessed 20 Nov 2026
  5. European Commission, Digital Product Passport, indicative timeline, accessed 20 Nov 2026
  6. Swiss Federal Office for Buildings and Logistics BBL, Bauprodukte and Voraussetzungen für das Inverkehrbringen von Bauprodukten (in German), accessed 20 Nov 2026
  7. Scalera, Product Matching and Risk Analysis, accessed 20 Nov 2026
  8. Insulation board example: fictional, for illustration